1-Butyl-3-methylimidazolium tetrafluoroborate as suitable solvent for BF₃: the case of alkyne hydration. Chemistry vs electrochemistry

• Marta David,
• Elisa Galli,
• Richard C. D. Brown,
• Marta Feroci,
• Fabrizio Vetica and
• Martina Bortolami

Beilstein J. Org. Chem. 2023, 19, 1966–1981, doi:10.3762/bjoc.19.147

• conditions for hydration of diphenylacetylene in BMIm-BF4 with BF3·Et2O In the initial investigation, the internal alkyne diphenylacetylene (1a) was selected as a model substrate to evaluate alkyne reactivity in the ionic liquid 1-butyl-3-methylimidazolium tetrafluoroborate (BMIm-BF4) catalysed by BF3·Et2O

Lewis acid-promoted direct synthesis of isoxazole derivatives

• Dengxu Qiu,
• Chenhui Jiang,
• Pan Gao and
• Yu Yuan

Beilstein J. Org. Chem. 2023, 19, 1562–1567, doi:10.3762/bjoc.19.113

• , which is an internal alkyne instead of a terminal alkyne, but no desired product was obtained. Next, we explored the substrate scope of 2-methylquinolines under the standard conditions. 2-Methylquinoline bearing different substituents at various positions gave the corresponding products with moderate to

Application of N-heterocyclic carbene–Cu(I) complexes as catalysts in organic synthesis: a review

• Nosheen Beig,
• Varsha Goyal and
• Raj K. Bansal

Beilstein J. Org. Chem. 2023, 19, 1408–1442, doi:10.3762/bjoc.19.102

• short times and required low catalyst loadings and a single product was obtained in each case. Furthermore, the cycloaddition with an internal alkyne could also be achieved using these catalysts. Interestingly, the catalysts were found effective in the cycloaddition of 2-(prop-1-yn-1-yl)pyridine with

Iron-catalyzed domino coupling reactions of π-systems

• Austin Pounder and
• William Tam

Beilstein J. Org. Chem. 2021, 17, 2848–2893, doi:10.3762/bjoc.17.196

Recent advances in the tandem annulation of 1,3-enynes to functionalized pyridine and pyrrole derivatives

• Yi Liu,
• Puying Luo,
• Yang Fu,
• Tianxin Hao,
• Xuan Liu,
• Qiuping Ding and
• Yiyuan Peng

Beilstein J. Org. Chem. 2021, 17, 2462–2476, doi:10.3762/bjoc.17.163

• esterified pyridines 29 in moderate to high yield. It is worth noting that 1,3-enynes 28 bearing internal alkyne moieties were not tolerated as substrates. In 2016, Aïssa and co-workers reported a nickel-catalyzed [4 + 2]-cycloaddition of 3-azetidinones 30 with 1,3-enynes 31 for the synthesis of 3‑hydroxy

Recent advances in the syntheses of anthracene derivatives

• Giovanni S. Baviera and
• Paulo M. Donate

Beilstein J. Org. Chem. 2021, 17, 2028–2050, doi:10.3762/bjoc.17.131

• aromatic ring were well tolerated during the cyclization, affording the corresponding anthracenes 14a–d. The authors expanded the scope of the reaction to internal alkyne substrates and obtained the corresponding substituted anthracenes. The most representative examples included compounds 14e–h [36]. In

Effective microwave-assisted approach to 1,2,3-triazolobenzodiazepinones via tandem Ugi reaction/catalyst-free intramolecular azide–alkyne cycloaddition

• Maryna O. Mazur,
• Oleksii S. Zhelavskyi,
• Eugene M. Zviagin,
• Svitlana V. Shishkina,
• Vladimir I. Musatov,
• Maksim A. Kolosov,
• Elena H. Shvets,
• Anna Yu. Andryushchenko and
• Valentyn A. Chebanov

Beilstein J. Org. Chem. 2021, 17, 678–687, doi:10.3762/bjoc.17.57

• our optimal conditions were tested on other Ugi substrates which contain a fragment of the internal alkyne with controlling reaction time by TLC (Scheme 5). In general, 0.5–1 hour reaction time and 140 °C were enough to achieve full substrate transformation to the product (by TLC), but for Ugi

Amine–borane complex-initiated SF₅Cl radical addition on alkenes and alkynes

• Audrey Gilbert,
• Pauline Langowski,
• Marine Delgado,
• Laurent Chabaud,
• Mathieu Pucheault and
• Jean-François Paquin

Beilstein J. Org. Chem. 2020, 16, 3069–3077, doi:10.3762/bjoc.16.256

• was performed on the internal alkyne 6-dodecyne, and the Dolbier’s protocol led to the moderate yield of 65% of the desired compound 2l, while only a 17% NMR yield was obtained in the reaction using DICAB as the radical initiator. Conclusion In conclusion, we have shown that amine–borane complexes can

Pauson–Khand reaction of fluorinated compounds

• Jorge Escorihuela,
• Daniel M. Sedgwick,
• Alberto Llobat,
• Mercedes Medio-Simón,
• Pablo Barrio and
• Santos Fustero

Beilstein J. Org. Chem. 2020, 16, 1662–1682, doi:10.3762/bjoc.16.138

• ). The cyclization of internal alkyne substrate 24b yielded pyrrolidine ring-fused cyclopentenone 25b in similar yield but lower diastereoselectivity. Finally, N-propargyl-N-[2-(trifluoromethyl)allyl] ether 24d, containing an ether linkage instead of the aforementioned sulfonamide linkage, gave furan

Fluorohydration of alkynes via I(I)/I(III) catalysis

• Jessica Neufeld,
• Constantin G. Daniliuc and
• Ryan Gilmour

Beilstein J. Org. Chem. 2020, 16, 1627–1635, doi:10.3762/bjoc.16.135

• exposure of a model internal alkyne to the standard conditions proved also successful affording 6 in 46% yield. Finally, replacement of the benzoate unit by a phthalimide moiety was possible and led to the protected amine derivative 7 (64% yield). The structure of α-fluoroketone 2 was unequivocally

Iodine-mediated hydration of alkynes on keto-functionalized scaffolds: mechanistic insight and the regiospecific hydration of internal alkynes

• Zachary Lee,
• Brandon R. Jones,
• Nyochembeng Nkengbeza,
• Michael Phillips,
• Kayla Valentine,
• Alexis Stewart,
• Brandon Sellers,
• Nicholas Shuber and
• Karelle S. Aiken

Beilstein J. Org. Chem. 2019, 15, 2747–2752, doi:10.3762/bjoc.15.265

• of the α-iodo intermediate, and methodology studies demonstrate that alkyl-capped, asymmetric, internal alkynes undergo a regiospecific hydration, also via the 5-exo-dig NGP pathway. Keywords: α-iodo intermediate; internal alkyne; iodine-mediated hydration; neighboring group participation

• intermediate 9, we turned our attention to investigating the reaction of internal alkynes 11 to examine the regioselectivity of the hydration process. Ester, sulfone, and phosphonate substrates were employed and, in all cases, the internal alkyne unit was capped by an ethyl group (Scheme 2). In general

Click chemistry towards thermally reversible photochromic 4,5-bisthiazolyl-1,2,3-triazoles

• Chenxia Zhang,
• Kaori Morinaka,
• Mahmut Kose,
• Takashi Ubukata and
• Yasushi Yokoyama

Beilstein J. Org. Chem. 2019, 15, 2161–2169, doi:10.3762/bjoc.15.213

• important difference is that Ru(I) catalysts work on the disubstituted alkynes to give 1,4,5-trisubstituted triazoles (Scheme 1) [18][19]. When both substituents of an internal alkyne are aromatic groups, the triazoles thus formed include the hexatriene motif in the structure. Although a number of

Synthesis of the polyketide section of seragamide A and related cyclodepsipeptides via Negishi cross coupling

• Jan Hendrik Lang and
• Thomas Lindel

Beilstein J. Org. Chem. 2019, 15, 577–583, doi:10.3762/bjoc.15.53

• abandoned. Dibromoalkene 16 was accessed from aldehyde 15 under Corey–Fuchs conditions and treated with n-hexane to separate triphenylphosphane oxide. For the conversion of 16 to the internal alkyne 17, the use of a large excess of freshly prepared LDA and iodomethane with a slow warm-up from −78 °C to rt

Continuous-flow processes for the catalytic partial hydrogenation reaction of alkynes

• Carmen Moreno-Marrodan,
• Francesca Liguori and
• Pierluigi Barbaro

Beilstein J. Org. Chem. 2017, 13, 734–754, doi:10.3762/bjoc.13.73

• oligomerization [55][56] competitive reactions. In addition, whenever an internal alkyne is to be hydrogenated, stereoselectivity must also be considered [57] (Scheme 1). The main byproduct usually obtained is the over-hydrogenation one, which results in conversion and selectivity to be inversely proportional

Towards the total synthesis of keramaphidin B

• Pavol Jakubec,
• Alistair J. M. Farley and
• Darren J. Dixon

Beilstein J. Org. Chem. 2016, 12, 1096–1100, doi:10.3762/bjoc.12.104

• -selective hydrogenation of the internal alkyne would present an efficient method for the synthesis of the 13-membered ring. The synthesis of the 11-membered ring could be achieved by a Z-selective alkene RCM reaction [5] to afford spirocyclic bislactam 4 from metathesis precursor 5. Bisalkene 5 could in

4-Hydroxy-6-alkyl-2-pyrones as nucleophilic coupling partners in Mitsunobu reactions and oxa-Michael additions

• Michael J. Burns,
• Thomas O. Ronson,
• Richard J. K. Taylor and
• Ian J. S. Fairlamb

Beilstein J. Org. Chem. 2014, 10, 1159–1165, doi:10.3762/bjoc.10.116

• methodology, we explored the addition of hydroxypyrones to both an allene and an internal alkyne to furnish a trisubstituted enol ether. Addition of 4-hydroxy-6-methyl-2-pyrone (3a) to the terminal allene 8 under the optimised conditions proceeded smoothly to give the trans-trisubstituted enol ether 9 in 52

• % yield (Scheme 3). However, numerous attempts to apply these conditions to an internal alkyne failed to furnish any desired product, presumably due to the steric influence of the additional methyl group. However, after an exhaustive screening of conditions (see Supporting Information File 1 for full

• desired product. The phacelocarpus 2-pyrones 1 and 2. Generalised O-functionalisation of 6-alkyl-4-hydroxy-2-pyrones 3. Synthesis of alkylated 2-pyrones 3b–e. Michael addition of 3a to allene 8 and internal alkyne 10. Synthesis of 2-pyronyl ethers 4a–l. Michael addition reaction optimisation. Synthesis of

Ambient gold-catalyzed O-vinylation of cyclic 1,3-diketone: A vinyl ether synthesis

• Yumeng Xi,
• Boliang Dong and
• Xiaodong Shi

Beilstein J. Org. Chem. 2013, 9, 2537–2543, doi:10.3762/bjoc.9.288

• [22]. The internal alkyne (1-phenyl-1-propyne), which was usually much less reactive than the terminal alkyne, was also tested. As expected, no reaction occurred at room temperature under the optimal conditions. To our delight, the desired products 8 were obtained while refluxing at 60 °C for 48 h

• performance. Reactions of internal alkyne and other O-nucleophiles. Isolated yields are given in paranthesis. aA ratio of 1:2.6 is observed for terminal/internal alkene mixtures. Combined yield. Screening of gold catalysts.a,b Reaction scope of alkynes.a Reaction scope with aliphatic alkynes.a Supporting

Acid, silver, and solvent-free gold-catalyzed hydrophenoxylation of internal alkynes

• Marcia E. Richard,
• Daniel V. Fraccica,
• Kevin J. Garcia,
• Erica J. Miller,
• Rosa M. Ciccarelli,
• Erin C. Holahan,
• Victoria L. Resh,
• Aakash Shah,
• Peter M. Findeis and
• Robert A. Stockland Jr.

Beilstein J. Org. Chem. 2013, 9, 2002–2008, doi:10.3762/bjoc.9.235

• materials. Conventional heating was also investigated during the screening phase of the project. Plunging a reactor vial containing 1, 4-nitrophenol, and either internal alkyne into a preheated oil bath (130 °C, 20 min) followed by rapid cooling also afforded high yields of the vinyl ethers (Table 1, entry

Gold-catalyzed regioselective oxidation of propargylic carboxylates: a reliable access to α-carboxy-α,β-unsaturated ketones/aldehydes

• Kegong Ji,
• Jonathan Nelson and
• Liming Zhang

Beilstein J. Org. Chem. 2013, 9, 1925–1930, doi:10.3762/bjoc.9.227

• approach. Gold-catalyzed regioselective oxidation of a sterically biased internal alkyne. Gold-catalyzed oxidation of the propargylic acetate 4a and the mechanistic rationale. A drastically different outcome by using diphenyl sulfoxide as the oxidant. Reaction scope studies for the formation of α

A reductive coupling strategy towards ripostatin A

• Kristin D. Schleicher and
• Timothy F. Jamison

Beilstein J. Org. Chem. 2013, 9, 1533–1550, doi:10.3762/bjoc.9.175

• ethylenediamine complex of lithium acetylide in a 1:1 THF/DMSO solvent mixture at 0 °C allowed the terminal alkyne to be accessed in 84% yield without rearrangement to the internal alkyne. Silyl protection afforded alkyne 50, which was prone to decomposition upon extended storage, even at −20 °C. Hydrozirconation

Cascade radical reaction of substrates with a carbon–carbon triple bond as a radical acceptor

• Hideto Miyabe,
• Ryuta Asada and
• Yoshiji Takemoto

Beilstein J. Org. Chem. 2013, 9, 1148–1155, doi:10.3762/bjoc.9.128

• the cyclization step is an important factor to achieve the highly asymmetric induction. We next investigated the reactivity of internal alkynes as electron-rich acceptors (Scheme 6). The internal alkyne 14 has shown a good reactivity comparable to that of the terminal alkynes 6A–C. In the absence of a

Microwave-assisted three-component domino reaction: Synthesis of indolodiazepinotriazoles

• Rajesh K. Arigela,
• Sudhir K. Sharma,
• Brijesh Kumar and
• Bijoy Kundu

Beilstein J. Org. Chem. 2013, 9, 401–405, doi:10.3762/bjoc.9.41

• Abstract A microwave-assisted three-component protocol involving N-1 alkylation of 2-alkynylindoles with epichlorohydrin, ring opening of the epoxide with sodium azide, and an intramolecular Huisgen azide–internal alkyne 1,3-dipolar cycloaddition domino sequence has been described. The efficacy of the

• azide–internal alkyne 1,3-dipolar cycloaddition reaction. Once the reaction conditions for the three-component format had been optimized, several 2-alkynylindoles bearing different functional groups were treated with epichlorohydrin and sodium azide in order to establish the scope and limitation of the

• the epoxide, and intramolecular Huisgen azide–internal alkyne 1,3-dipolar cycloaddition reaction, led to the generation of the diazepine and triazole rings annulated to the indole through the formation of four new sigma bonds in a single step. One-pot three-component domino reaction furnishing indole

On the proposed structures and stereocontrolled synthesis of the cephalosporolides

• Sami F. Tlais and
• Gregory B. Dudley

Beilstein J. Org. Chem. 2012, 8, 1287–1292, doi:10.3762/bjoc.8.146

• internal alkyne 6, which was submitted to gold-catalyzed cycloisomerization [33] to afford spiroketals 7a and 7b (the silyl ether is concomitantly hydrolyzed) as a 1:1 mixture of isomers. Exposure of this mixture to zinc chloride promoted isomerization to provide 7a in >20:1 dr. TEMPO oxidation then

• silyl ether 19 with the (R)-propylene oxide produced the internal alkyne 20 (Scheme 5). Gold(I) chloride in MeOH induced the spiroketalization of alkyne 20 with concomitant cleavage of the PMP acetal and partial cleavage of the TBS ether. After completion of the desilylation with TBAF, a mixture of 5,5

Parallel solid-phase synthesis of diaryltriazoles

• Matthias Wrobel,
• Jeffrey Aubé and
• Burkhard König

Beilstein J. Org. Chem. 2012, 8, 1027–1036, doi:10.3762/bjoc.8.115

• ) was preswollen in dimethylformamide (2 mL/100 mg resin) for 2 h at room temperature. Subsequently, the catalyst complex pentamethylcyclopentadienylbis(triphenylphosphine)ruthenium(II) chloride, Cp·RuCl(PPh3)2, (5 mol %) and either a terminal or an internal alkyne (4 equiv) were added. After the

An intramolecular inverse electron demand Diels–Alder approach to annulated α-carbolines

• Zhiyuan Ma,
• Feng Ni,
• Grace H. C. Woo,
• Sie-Mun Lo,
• Philip M. Roveto,
• Scott E. Schaus and
• John K. Snyder

Beilstein J. Org. Chem. 2012, 8, 829–840, doi:10.3762/bjoc.8.93

• ), under the optimized cycloaddition conditions (diglyme, microwave irradiation, 120 °C, 20 min), producing the desired α-carbolines in excellent yields (96–98%). However, propargyl amide 13f with the internal alkyne (Table 4, entry 6) required a longer reaction time (40 min) for the cycloaddition to be